GE PACSystems RX7i, Reference Manual

Page: 15 / 317

Chapter 1. Introduction
4 PACSystems* RX7i, RX3i and RSTi-EP CPU Reference Manual GFK-2222AD
Rev Date Description
S July-
2013
▪
Support for Modbus/TCP Server, SRTP channels and Modbus/TCP client channels on RX3i
CPE305/CPE310 embedded Ethernet interface
– Chapter 2 & Chapter 5
▪
Support for Access Control List – Chapter 3
▪
Modbus TCP/IP mapping for CPE305/CPE310 – Chapter 30
▪
Enhanced Security Passwords and OEM Protection – Chapter 4
▪
Serial I/O protocol enhancements (Data Set Ready, Ring Indicator, and Data Carrier Detect)
– Chapter 6
▪
Diagnostics for PROFINET alarms and PROFINET network faults, including #PNIO_ALARM,
SA0030
– refer to PACSystems RX7i and RX3i CPU Programmer’s Reference Manual,
GFK-2950 Chapter 3 & Chapter 9.
▪
Instruction executions times measured for RX3i CPU320/CRU320 – Appendix A
▪
Sweep impact times for new modules: IC694MDL758, IC694APU300-CA and later,
IC695PNS001, IC694ALG442, IC694ALG220, IC694MDL645 and IC694MDL740
– Appendix A
earlier
▪
Added instructions for replacing the RX3i CPE305/CPE310 real-time clock battery: Chapter
2.
▪
Corrected definitions of reverse acting and direct acting modes for PID functions: refer to
PACSystems RX7i and RX3i CPU Programmer’s Reference Manual, GFK -2950 Chapter 7.
▪
Expanded data for Boolean execution measurements – Appendix A
▪
Re-instated instruction times for RX7i CPE030/CRE030/CPE040 release 6.0 as published in
version Q of the manual (unintentionally omitted from version R)
– Appendix A
▪
Compatibility information for volatile memory backup batteries has been consolidated in the
PACSystems Battery and Energy Pack Manual, GFK-2741 – throughout