2
RX3i Ethernet Interface Module IC695ETM001-HW IPI
GFK-2332Y
August 2017
IC695ETM001 Specifications
Ethernet processor speed
200 MHz
Connectors
- Station Manager (RS-232) Port: 9-pin female D-connector
- Two 10BaseT / 100BaseTX Ports: 8-pin female shielded RJ-45
LAN
IEEE 802.2 Logical Link Control Class I
IEEE 802.3 CSMA/CD Medium Access Control 10/100 Mbps
Number of IP addresses
One
Number of Ethernet Port
Connectors
Two. both are 10BaseT / 100BaseTX with auto-sensing RJ-45 connection.
Embedded Ethernet Switch
Yes – Allows daisy-chaining of Ethernet nodes.
Serial Port
Station Manager Port:
RS-232 DCE, 1200 – 115,200 bps.
Refer to the
PACSystems RX3i System Manual
, GFK-2314, for product standards and general specifications.
Ethernet Interface Status Bits
Note:
Unless
LAN Interface OK
(Status Bit 16) is set, the other status bits are invalid.
LAN Interface Status Bits
1
Port 1A full duplex
2
Port 1A 100Mbps
3
Port 1B full duplex
4
Port 1B 100 Mbps
5
Network Time Locked
6
Redundant IP address is active
7-8
Reserved
9
Any Channel Error (error on any channel)
10–12
Reserved
13
LAN OK
14
Resource problem
15
Module Overtemperature
16
LAN Interface OK
Channel Status Bits (Two for each channel)
17
Channel 1 Status (SRTP: Data Transfer)
18
Channel 1 Status (SRTP: Channel Error)
...
...
79
Channel 32 Status (SRTP: Data Transfer)
80
Channel 32 Status (SRTP: Channel Error)
