GE PACSystems ICRXIDIXNE19LCTA, User Manual, Page: 27 / 48

8 3
5
2
1
6
4
7
Lever Screw Tightening Order
3.3.1 Removal
➢ ➢
To remove the RXi Display
1. Using a #2 Phillips screwdriver, loosen the lever screws.
2. Swing the eight levers on the back of the RXi Display to their retracted position, held
in place by a ball plunger.
Caution
Be careful to not drop the unit when tilting it
forward to remove it from the enclosure.
3. Insert a thin blade from the front between the gasket and panel wall at the top center
location to depress the latch.
4.
Tilt the RXi Display forward and remove it from the front of the enclosure.
Hardware Installation GFK-2898B 27
For public disclosure