GE PACSystems ICRXIDIXNE19LCTA, User Manual

Page: 21 / 48

➢ ➢
To initially start up the RXi Display
FGND
O V +24 V
For model numbers, refer
to the table
Ordering
Information .
1. Attach the power supply output to the RXi Display’s dc power plug using 16 – 24 AWG
(1.31– 0.20 mm
2 cross section) wire. For frame ground, use shortest length 16 AWG
(1.31 mm 2 ) wire to ground. The recommended wire stripping length is 7 mm (0.28 in).
Tighten the screws that hold the wires to a torque of 0.452 Nm (4 in-lb).
2. Insert the plug into the RXi Display’s input power connector and securely tighten the
attaching screws. The torque range for the attaching screws is 0.452 Nm (4 in-lb). (For
proper grounding, refer to the section
Grounding .)
3.
(Optional) If desired, attach a USB-compatible keyboard and a USB-compatible mouse.
4. Power up the unit and check for any concealed damage that may have been caused by
incorrect transportation, operating/storage conditions or handling. To power up the unit,
touch
Power On/Off
for at least ½ second.
Caution
If you notice any damage, remove power from the
unit immediately and secure it against unintentional
use.
During power up, you should see the normal operating system starting displays on the
monitor. During normal power up and operation, the Power On/Off status indicator displays
as follows:
Power On/Off LED Status Indicator
LED Description
Solid white RXi Display is off
Blinking blue RXi Display is turned on after input power is restored
Solid green RXi Display has completed startup and is running
Solid green RXi Display is turned on without input power loss
5.
For models loaded with Windows 7 Professional, the operating system starts
automatically. During startup, the operating system splash screen displays on the monitor.
To activate the operating system, follow the on-screen prompts. The Windows 7 product
key is on the Microsoft Certificate of Authenticity label, which is on the side of the RXi
Display.
To activate the operating system online, configure the RXi Display’s Ethernet settings for
operation on your network.
Note For models without an operating system, two hard drive options are available: a
blank 32 GB mSATA SSD or a blank 250 GB SATA magnetic HDD. Load the desired
operating system and associated drivers to fully use the I/O interfaces.
Pre-Installation Checks and Initial Startup GFK-2898B 21
For public disclosure