8
49-1000464 Rev. 0
vCARE AND
CLEANING
System Cleaning / Sanitizing Procedure
(continued)
8. When the 'Cleaning' indicator light turns off, drain the
Opal.
9. Unhook the top of the drain hoses at the back of the unit.
See figure 5.
10. Then lay them down to drain into a sink or bucket that is
below the level of the ice maker. See figure 6 and 7.
11. Remove the plugs and allow the water to completely
drain. See figure 7.
12. Once water stops flowing, re-insert the drain plugs.
13. To rinse: add five cups of fresh water to the water
reservoir, and press the 'Clean' button to initiate a
second cleaning cycle. To exit the cleaning cycle
at any time, press and hold the 'Clean' button for 3
seconds.
14. Repeat steps 8 through 13 two more times, adding
fresh water to the reservoir each time (you may
continue to repeat the rinse cycle, for as many times
as you like).
15. Replace drain tubes on back. See figure 8.
16. When complete, fill unit with fresh water and press the
'Power' button to start making ice. See figure 9.
Care and Cleaning
Figure 5
Pull to the left to unhook
Figure 8
Replace drain tubes
Figure 7
Figure 9
Figure 6
Making Ice
Defrosting Cleaning
Hold 3 Sec
Add Water
Clean
Light
Power
Summary of Contents for OPAL XPIO13BCBT
Page 16: ...16 49 1000464 Rev 0 NOTES Notes ...
Page 17: ...49 1000464 Rev 0 17 NOTES Notes ...
