10
49-1000464 Rev. 0
CARE AND
CLEANING
Making Ice with Opal
Draining Opal
Water Filter
Once Opal has been cleaned/sanitized, move the ice maker to its desired location and complete the following steps.
1. Remove ice bin.
2. Fill reservoir with potable (safe to drink) water up to
the "Max Fill" line. Water hardness must be less than
12 grains per gallon. Do not fill reservoir with any
liquid except water. Using any liquid except potable
water is misuse and will void your warranty.
3. Plug the ice maker into a grounded outlet.
4. Touch the Power button to start the ice maker. The
indicator on the left-hand side will light up 'Making Ice'
to confirm that unit has begun to make ice.
5. Opal will begin to produce ice in 15-30 minutes. It will
continue to make ice until the bin is full, or it runs out
of water. To continue making ice, just add more water.
We recommend draining your Opal when:
1. You put it away or anytime it's being relocated
2. You turn it off for more than a few days. (i.e. vacation)
3. You are not using much ice. Continous recirculation
of meltwater may affect taste. For best results, drain
your Opal.
The Opal Water Filter, is available at GE Appliances
and is the only water filter compatible with Opal. Please
follow the installation instructions included with your filter.
NOTE:
Remove your water filter (if installed) and
reinstall the screened intake cap prior to cleaning your
Opal.
Water Reservoir
Max fill line
Water filter snaps into place
Making Ice
Defrosting Cleaning
Hold 3 Sec
Add Water
Clean
Light
Power
Side View
Front View
Water Filter
Summary of Contents for OPAL XPIO13BCBT
Page 16: ...16 49 1000464 Rev 0 NOTES Notes ...
Page 17: ...49 1000464 Rev 0 17 NOTES Notes ...
