GE OPAL XPIO13BCBT, Owner'S Manual

Page: 6 / 20

6
49-1000464 Rev. 0
Installation Requirements
CAUTION
Lifting Hazard: It is recommended to have two people move and install the ice maker in
order to prevent injury.
■ Product is designed to be installed indoors. Do not
use your ice maker outdoors.
■ Product must be installed upright on a flat, level
surface that is able to support the total weight when
full of water.
■ Ensure a minimum of three inches (3") clearance
around the side and back walls of the ice maker for
proper air circulation.
■ Install the product in a well-ventilated area with an
ambient temperature between 55°F and 90°F.
■ Do not place the product near heat sources such as
ovens or cooktops.
■ Do not place the product in direct sunlight.
Prepare Opal For Use
1. Carefully remove packing material. Do not use sharp
tools that can damage the box contents.
2. Ensure all components are present. If any item is
missing, please contact 1.866.907.6718.
3. Place the ice maker upright on a flat, level surface
and plug it in.
4. Install drip tray by sliding it under the front edge of
Opal. The tray slots should align with the front feet of
Opal.
5. Sanitize and rinse the ice maker with clean water for
five minutes before first use.
NOTICE
Some types of under-cabinet lamps can be hot enough
to cause damage to your Opal top's appearance.
Getting Started
GETTING ST
ARTED
Making Ice
Defrosting Cleaning
Hold 3 Sec
Add Water
Clean Light
Power