NX-148E LCD Keypad
15
READING THE EVENT LOG
The control panel has an event log that can be retrieved using a master code. This log
contains a listing of the events along with date, time, and partition where the event
occurred.
Step 1
To view the log, press
r
9
0
. The LCD screen will prompt you for
a code.
Step 2
Enter your master code. The LCD screen will now show the most recent
event.
Step 3
To view the events from most recent to the oldest, press
–
.
Step 4
To view the events from the oldest to the newest, press
•
. The display
contains the following information.
Event
User or Zone ID
Date
Indicates partition
(Month/Day)
Time shown in
and
indicates an
24-hour format
event not reported
This screen shows an opening of Partition 3 on September 25
th
at 5:27 p.m. by user 75.
The [
r
] shows that this event is not programmed to be reported to the central
monitoring station. Refer to Appendix A on page 23 for a list of possible log messages.
ADJUSTING THE VIEW / BRIGHTNESS OF THE LCD
Step 1
Enter
r
9
1 .
The LCD Screen will prompt for a code.
Step 2
Enter [
master code
]. The LCD will now prompt you to raise or lower the view.
Step 3
Using the
–
•
scroll keys to the right of the LCD, you can raise or lower
the viewing angle of the text.
Step 4
To advance to the Brightness option, press
r
The LCD will prompt you to
brighten or dim the LCD lighting. Use the scroll keys again to adjust to
desired brightness.
Step 5
When completed, exit by pressing
r
Open
75
9/25 17:57 P3*
Summary of Contents for NX-148E - Security NetworX LCD Keypad
Page 1: ...NetworX Series NX 148E LCD Keypad User Manual ...
Page 2: ......
Page 29: ...SYSTEM NOTES ...
Page 30: ...NX 148E USERS MANUAL NX148EUC05 REV C June2005 ...
