manualshive.com logo in svg

GE NX-1448E - Security NetworX 48-Zone Fixed, User Manual

Share
Download
GE NX-1448E - Security NetworX 48-Zone Fixed User Manual Download Page 6

Page 6 

NX1448E Icon Keypad 

TABLE OF CONTENTS 

 

GLOSSARY OF TERMS .......................................................................8 

ICON KEYPAD DISPLAY ....................................................................9 

EMERGENCY ACTIVATION KEYS .....................................................10 

UNDERSTANDING THE ICONS & LIGHTS.........................................11 

ARMED ICON ................................................................................. 11 

BYPASS LIGHT............................................................................... 11 

CANCEL LIGHT .............................................................................. 11 

CHIME LIGHT ................................................................................ 11 

EXIT LIGHT ................................................................................... 11 

FIRE ICON .................................................................................... 11 

INSTANT ICON .............................................................................. 12 

LISTEN-IN ICON ............................................................................ 12 

POWER ICON................................................................................. 12 

READY / NOT READY ICON .............................................................. 12 

SILENCED ICON............................................................................. 12 

STAY LIGHT .................................................................................. 12 

TAMPER/TROUBLE ICONS ............................................................... 12 

ZONE ICON ................................................................................... 12 

KEYPAD FUNCTIONS ......................................................................13 

ARMING YOUR SYSTEM IN THE “AWAY” MODE ................................... 13 

ARMING YOUR SYSTEM IN THE “STAY” MODE .................................... 14 

USING THE QUICK ARM  ................................................................. 15 

CHANGING MODES WHILE SYSTEM IS ARMED ................................... 15 

Summary of Contents for NX-1448E - Security NetworX 48-Zone Fixed






























Reviews:

No comments

Brands by name

Popular brands

Load more brands