manualshive.com logo in svg

GE MultiLink ML1200, Instruction Manual

Share
Download
GE MultiLink ML1200 Instruction Manual Download Page 158

9–12

MULTILINK ML1200 MANAGED FIELD SWITCH – INSTRUCTION MANUAL

PORT MIRRORING AND SETUP

CHAPTER 9: PORT MIRRORING AND SETUP

Z

Make sure the 

Mirror Status

 is also set to enabled for mirroring:

For security reasons, GE Multilin recommends that the port mirroring be disabled using the 

Edit

 button and setting the 

Mirror Status

 to off once port monitoring is completed.

Note that:

1.

Only one port can be set to port mirror at a time.

2.

Both the ports (monitored port and mirrored port) have to belong to the same 
VLAN.

3.

The mirrored port shows both incoming as well as outgoing traffic.

9.4.2

Port Setup

With the ML1200, the specific characteristics of each port can be individually 
programmed. 

Summary of Contents for MultiLink ML1200

























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands