manualshive.com logo in svg

GE Multilin GEK-113328A, Instruction Manual, Page: 125 / 218

Share
Download
GE Multilin GEK-113328A Instruction Manual Download Page 125

GEK-113328A

G650 Generator Protection & Control System

3-65

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES

3.3 WEB SERVER

3

3.3.5 OSCILLOGRAPHY

The oscillography screen allows obtaining from the relay available oscillography records in that moment.

This screen includes two windows. The first window shows oscillography records available in the relay, identified by an
index, being the highest index the most recent record (oscillography record No 6 in the example below).

Figure 3–37: OSCILLOGRAPHY SCREEN

If the user clicks on the oscillo record he wants to retrieve, the window on the right will show a description of the record
header, indicating its date, time, and the most relevant parameters of the record. Once a record is selected, it is required to
press the 

Download

 button. The system will then open a window to allow saving the files in Comtrade format in the PC

hard drive. Once the records have been saved, the system will ask if the user wants to open GE-OSC tool (Comtrade
record viewer) to view the downloaded files.

Figure 3–38: GE-OSC LAUNCH SCREEN

Clicking on the 

Home

 option, the system will return to the web server main screen.

Summary of Contents for Multilin GEK-113328A



























































































































































































































Reviews:

No comments