112
GENERAL
D400 SUBSTATION GATEWAY USER’S MANUAL
COMPLIANCE STANDARDS
APPENDIX A: STANDARDS & PROTECTION
Table 26: Immunity standards
Table 27: Safety publications
Standard Name
Description
Test Specification
IEC 61000-4-2
IEC 60255-22-2
IEEE
®
C37.90.3
Electrostatic discharge (ESD) immunity
test
IEC 61000-4-3
IEC 60255-22-3
IEEE C37.90.2 (10 V/m)
Radiated, radio-frequency
electromagnetic field immunity test
IEC 61000-4-4
IEC 60255-22-4
IEEE C37.90.1
Electrical fast transient/burst immunity
test
IEC 61000-4-5
Surge immunity test
IEC 61000-4-6
IEC 60255-22-6
Immunity to conducted disturbances,
induced by radio-frequency fields
IEC 60255-22-1
1 MHz burst immunity test
IEC 61000-4-8
Power frequency magnetic field immunity
test
IEC 61000-4-12
Ring wave immunity test
IEC 60255-22-1
Ontario Hydro A-28M-82
Damped Oscillatory and Ring wave
IEEE C37.90.1
Oscillatory SWC Waveform Immunity
IEEE C37.90.1
Temperature Testing: Operational Test
IEEE C37.90.1
Temperature Testing: Non-operational
Test
IEC 61000-4-11
Voltage dips, short interruptions and
voltage variations immunity tests
IEC 61000-4-16
Test for immunity to conducted, common
mode disturbances in the frequency
range 0 Hz to 150 kHz
IEC 61000-4-17
Ripple on DC input power port immunity
test
IEC 61000-4-18
Damped oscillatory wave immunity test
IEC 61000-4-29+
Voltage dips, short interruptions and
voltage variations on DC input power port
immunity test
This standard only applies when using
high voltage DC as the source (100 VDC to
300 VDC).
IEC 60255-11
Interruptions to and alternating
component (ripple) in DC auxiliary
energizing quantity of measuring relays
Standard Name
Description
Test Specification
IEC 61010-1
Safety requirements for electrical
equipment for measurement, control and
laboratory use - General requirements
IEC 60255-5
Insulation coordination for measuring
relays and protection equipment-
Requirements and tests
