Installation
27" Grill Cart Assembly
• Bolt back brace to side panels by installing
bolt with washer from the outside and
secured with nut on the inside. (2 bolts on
each side).
Back Brace
Side Panel
1/4-20 x 1/2
Bolts
1/4 Washer
1/4-20 Nuts
USE
4
EACH
• Check to be sure all panels and holes in the
bottom right corner of the front panel are
correctly aligned.
• Tighten bolts by holding a 7/16" wrench on
bolt and turning nuts below with another
7/16" wrench.
• Snap grommet into the hole on the outside
of the right side panel.
• Place wheel cap onto axle and tap in place
with a mallot.
• Slide a wheel onto the axle with the flat side
against the cap and the spacer side (the
protruding side) towards the inside of the
cart.
• Slide the axle through the holes in the cart.
• Place second wheel onto the axle, with
spacer side against the cart, and tap wheel
cap with mallet to secure.
USE 2
WHEEL CAPS
4
Step 5
Install
Back
Brace
Step 6
Check Panel
Alignment,
Tighten
Assembly
Step 7
Install
Wheels
