6000 & 7000 Series DISHWASHERS
PAGE 48
5.2.27 Pressure Switch
CAUTION. Switch off electrical power supply
and turn off water supply at main or isolating
valve.
5.2.27.1 Refer to section 5.1 for access to the Pressure
Switch.
The pressure switch is located on a bracket that is mounted
at the rear of the mains terminal compartment. To release the
pressure switch and bracket remove the screw holding the
bracket to the mains terminal compartment. Access to the
screw can be gained thought the compartment itself.
Pressure Switch Bracket
Mains Terminal Compartment Pressure Switch
Side view of the Mains Terminal Compartment
5.2.27.4 Remove the pressure switch hose and wire connec-
tors.
5.2.27.5 Reassemble the dishwasher in reverse order.
5.2.27.6 Operate and test dishwasher before leaving.
5.2.28 Capacitor - Wash Motor
CAUTION. Switch off electrical power supply
and turn off water supply at main or isolating
valve.
The wash motor capacitor is located on the rear panel
support for the tub.
5.2.28.2 Push the mounting through the square fixing hole in
the rear panel support.
5.2.28.3 Remove the two 1/4" terminals and wires from the
tab connections of the Capacitor.
5.2.28.4 Reassemble the dishwasher in reverse order.
5.2.28.5 Operate and test dishwasher before leaving.
Wash Motor Capacitor Overtemperature Thermostat
Rear Support Panel
Detent Spring Mounting Back of Rear Panel Support
5.2.28.1 To release the capacitor compress the detent spring
mounting on the back of the rear panel support.
