– 18 –
Caution: The star washer is easily damaged
during removal and should not be reused. Order
a new set of star washers (part number:
WD01X10254).
21. Remove the star washer from the
dishwasher door hinge.
16. Pull the spring and spring bolt key from the
mounting bracket.
17. Lift the bottom of the spring loop from the
hinge arm stud.
18. Open the dishwasher door approximately 30
degrees.
19. Lift the bottom hinge arm up from the bottom
hinge, far enough to expose the hook.
Note: There is a door hinge assembly on both
the left and right sides of the dishwasher. Both
door hinge assemblies must be removed in order
to remove the door. The procedure to remove the
right-side door hinge assembly is outlined in steps
13 through 24. The left-side door hinge assembly
removal is identical.
13. Remove the 4 screws, access panel, and toe-
kick panel from the dishwasher.
14. Remove the side panels. (See
Side Panels
.)
15. Mark the position of the spring bolt key in the
mounting bracket with a felt-tip marker.
Key
Bracket
Loop
Stud
20. Close the dishwasher door.
Open
Lift
Hinge
Hook
Caution: The
star washer is
easily damaged
and should not
be reused.
Star Washer
Summary of Contents for Monogram ZBD1800K Series
Page 40: ... 40 Illustrated Parts Catalog ...
Page 41: ... 41 ...
Page 42: ... 42 ...
Page 43: ... 43 ...
