– 17 –
9. Remove the
Door Panel
.
10. Disconnect the 2 terminal lugs from the
Detergent/Rinse Module
switch.
Door Assembly
Removal and Replacement
1. Disconnect the electric supply from the
dishwasher.
2. Carefully pull the dishwasher out from its
installation.
3. Remove the 6 screws that connect the control
panel cover to the dishwasher door. (See
Timer
, step 6.)
4. Close the dishwasher door.
Caution: Place a cloth or cardboard between the
control panel and the dishwasher door to prevent
marring the door.
5. Release the door latch and allow the control
panel cover to hang against the dishwasher
door.
Timer
Door Latch
5. Remove the single screw just above and to
the side of each front leveling leg.
6. Disconnect the ground wire from the
Timer.
7. Disconnect the green and white multipin
connectors from the
Timer
.
8. Disconnect the 4 terminal lugs from the
Door
Switch and Latch Assembly
.
11. Remove the bolt, nut, and ground wire from
the door.
12. Pull the wire harness from the door.
Bolt, Nut, and
Ground Wire
Wire Harness
(Continued next page)
Summary of Contents for Monogram ZBD1800K Series
Page 40: ... 40 Illustrated Parts Catalog ...
Page 41: ... 41 ...
Page 42: ... 42 ...
Page 43: ... 43 ...
