GE MobileView 4, Installation Manual

Page: 92 / 106

MobileView 4
Installation Manual
82
Troubleshooting
The system LEDs provide a substantive and instantaneous status of the MobileView DVR.
See
Table 4 below for details on what each LED indicates.
For example, software LED 3 corresponds to the red LED on the panic button. When active,
a green LED indicates a fault exists that needs maintenance. Examples of common faults are
video loss on one or more cameras, system overwriting old archive data, drive full, fan or
fuse failure, etc. Generally these types of faults are easy to identify through use of the Video
Manager client or by review of the system log file. They are also easy to fix.
Table 4. System LEDs
LED type LED Condition if green Condition if red
Power 1 Main power present Input voltage out of tolerance
2 Main fuse good Not applicable
3 Ignition signal present Not applicable
4 Internal PSU voltage within tolerance None
Status 1 System on MPU heartbeat (slow pulse)
2 Digital input change Fan failure
3 HDD activity System overheating
4 Back box network link status Back box network activity
Software 1 Capture software active System fault
2 Valid GPS tracking solution Not applicable
3 System requires maintenance Not applicable
4 None Minimum storage failure
Com 1 Data received from MPU Data sent to MPU
2 COM 2 data received COM2 data sent
3 COM 3 data received COM 3 data sent
4 Data received from GPS module Data sent to GPS module