Revision D
MobileLink
11
2002783-060
Installation Procedures
23. If this is the first client bridge to be configured, select File
→
Save
Configuration and browse to a location on your hard drive to save
this configuration file.
127(6
For security reasons, the encryption information does not get
stored as part of the saved Configuration Capture file. If the
customer is entering the encryption information for each bridge,
they will need to be aware of this information, and be prepared to
type the encryption key into the setup for each client bridge.
When you are configuring more client bridges, select File
→
Load
Configuration. Browse to the location on your hard drive where
the configuration was saved in step 23. As you configure more
client bridges, the configuration of the first bridge will appear.
Change settings where appropriate. If done accurately, this will
save time in configuring the other client bridges.
