TD220MAX_manual_v11.doc
05-6906A01
Page 12 of 49
7/31/2014
3.
Configure the Base as follows:
System Configuration Menu
-==========================================================================-
A) Timing Source GPS
B) STFP Radio ID 64
C) STFP Receive Port 53000
D) STFP Transmit Address x.x.x.x (Note: Use IP address of Poller PC)
E) STFP Transmit Port 50000
F) STFP Epoch Size 6 sec
G) STFP Slot Delay 2
H) STFP Send OTA Beacon enabled
I) Timing Signal Timeout 60 Seconds
Select a letter to configure an item, <ESC> for the prev menu
Radio Configuration Menu
-==========================================================================-
A) Transmit Frequency 219.000000 MHz
B) Transmit Frequency 219.000000 MHz
C) Output Power 2 W
D) Enable External PA enabled
E) Max Message Age 60 sec
F) Force Tx Key Normal
TX Key Timeout 5 sec
Select a letter to configure an item, <ESC> for the prev menu
4.
Reboot the Base
x dB
