TD220MAX_manual_v11.doc
05-6906A01
Page 13 of 49
7/31/2014
5.
Configure the Mobile as follows:
System Configuration Menu
-==========================================================================-
A) Timing Source OTA
B) STFP Radio ID 0
C) STFP Receive Port 53000
D) STFP Transmit Address x.x.x.x (Note: Use IP address of Poller PC)
E) STFP Transmit Port 50011
F) STFP Epoch Size 6 sec
G) STFP Slot Delay 2
H) STFP Send OTA Beacon disabled
I) Timing Signal Timeout 60 Seconds
Select a letter to configure an item, <ESC> for the prev menu
Radio Configuration Menu
-==========================================================================-
A) Transmit Frequency 219.000000 MHz
B) Transmit Frequency 219.000000 MHz
C) Output Power 2 W
D) Enable External PA enabled
E) Max Message Age 60 sec
F) Force Tx Key Normal
TX Key Timeout 5 sec
Select a letter to configure an item, <ESC> for the prev menu
6.
Reboot the Mobile
7.
Obtain the TD220X Poller (TD220X_Poller.exe) from GE MDS.
8.
In the Poller directory, create or modify the TD220X poller data configuration file
(TD220X_Poller.parms) as shown below.
