4
P21/P22/P23 Protected Network Station
05-4161A01, Rev. C
2.3 Antenna Port Configurations
The Protected Network Station can be configured with a single antenna,
or with two separate antennas for full redundancy to continue operation
if the primary antenna becomes damaged or is otherwise inoperative.
The following con
fi
gurations are available:
•
Single antenna port
The port is automatically switched to the active transceiver by
an internal relay.
•
Two antenna ports
Each port is connected to one of the transceivers and to separate
station antennas.
2.4 Items Supplied
Figure 2 shows the contents of a typical Protected Network Station ship-
ment.
Invisible place holder
Figure 2. Protected Network Station Typical Shipment
POWER CORD(S)
(AC type shown)
REDUNDANT
STATION
TRANSCEIVER
INSTRUCTION
MANUAL
P-21/22
INSTRUCTION
MANUAL
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8464-MDS-P22-Redundant-Transceiver-Chasis-(Enet).aspx
