manualshive.com logo in svg

GE MDS ORBIT MCR, Technical Manual, Page: 193 / 463

Share
Download
GE MDS ORBIT MCR Technical Manual Download Page 193

 

MDS 05-6632A01, Rev. F 

MDS Orbit MCR/ECR Technical Manual 

193

 

> show interfaces-state 
  interfaces-state interface Bridge 

type         bridge 
admin-status up 
oper-status  up 
if-index     1 
phys-address 00:06:3d:07:96:82 
statistics discontinuity-time 2014-02-12T14:29:35-05:00 
statistics in-octets 259644036 
statistics in-unicast-pkts 3188877 
statistics in-multicast-pkts 0 
statistics in-discards 4126 
statistics in-errors 0 
statistics out-octets 737353 
statistics out-unicast-pkts 1135 
statistics out-discards 0 
statistics out-errors 0 
ipv4 forwarding true 
ipv4 mtu   1500 

               

PREFIX 

IP            

LENGTH  ORIGIN 

----------------------------------------------------- 
10.10.10.141  23       

static 

 
               

LINK LAYER 

IP             

ADDRESS               ORIGIN   STATE 

----------------------------------------------------- 
10.10.10.109    00:11:11:e0:2e:70    dynamic  stale 
10.10.10.98     80:c1:6e:f0:3b:7a    dynamic  reachable 

 

  LAN 

3.8.2

Understanding 

The unit has external Local Area Network (LAN) ports (ETH1/2 ports) that can be used to connect to a 
local (wired) LAN. It supports both IPv4 and IPv6 addresses and may be assigned multiple IP addresses. 
The LAN port can be assigned static IP addresses or a dynamically allocated address can be assigned 
using DHCP. 

 

NOTE 

The LAN port should be assigned IP addresses only if it is a routed interface (that is, 

not

 in a 

bridge).  

Configuring 

From the Interfaces screen the status may be displayed by clicking on the interface and scrolling down to 
the statistics information:  

Navigate to: 

Interfaces / Add/Delete Interfaces

 

Summary of Contents for MDS ORBIT MCR
















































































































































































































































































































































































































































































Reviews:

No comments