GE MDS ORBIT ECR, Technical Manual

Page: 400 / 463

400 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
8: gid 1013;
6.13 Showing Information
Reserved for a future release.
6.14 Control Sequences
The default key strokes for editing the command line and moving around the command history are as
follows.
Move the cursor back one character Ctrl-b or Left Arrow
Move the cursor back one word Esc-b or Alt-b
Move the cursor forward one character Ctrl-f or Right Arrow
Move the cursor forward one word Esc-f or Alt-f
Move the cursor to the beginning of the command line Ctrl-a or Home
Move the cursor to the end of the command line Ctrl-e or End
Delete the character before the cursor Ctrl-h, Delete, or Backspace
Delete the character following the cursor Ctrl-d
Delete all characters from the cursor to the end of the line Ctrl-k
Delete the whole line Ctrl-u or Ctrl-x
Delete the word before the cursor Ctrl-w, Esc-Backspace, or Alt-Backspace
Delete the word after the cursor Esc-d or Alt-d
Insert the most recently deleted text at the cursor Ctrl-y
Scroll backward through the command history Ctrl-p or Up Arrow
Scroll forward through the command history Ctrl-n or Down Arrow
Search the command history in reverse order Ctrl-r
Show a list of previous commands
run the “show cli history” command
Capitalize the word at the cursor Esc-c
Change the word at the cursor to lowercase Esc-l
Change the word at the cursor to uppercase Esc-u
Abort a command/Clear line Ctrl-c
Quote insert character Ctrl-v/ESC-q
Redraw the screen Ctrl-l
Transpose characters Ctrl-t
Enter multi-line mode ESC-m
6.15 Commands
The commands available to the user differs, depending on whether the CLI is in operational mode or
configuration mode. The following commands are describe in the next sections:
Operational Mode Commands Configuration Mode Commands
commit annotate
configure commit
exit compare
help copy
ping delete