GE MDS ORBIT ECR, Technical Manual

Page: 138 / 463

138 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
451.4 MHz and a receive frequency of 456.4 MHz. Your own LN frequencies must be set according to
your user license.
% set interfaces interface LnRadio ln-config device-mode access-point network-name MyNetwork
tx-frequency 451.4 rx-frequency 456.4
% show interfaces interface LnRadio ln-config | details
radio-mode standard;
device-mode access-point;
network-name MyNetwork;
data-compression lzo;
header-compression true;
power
40;
tx-frequency 451.4;
rx-frequency 456.4;
channel 12.5KHz-9.6ksps;
modulation automatic;
fec false;
security {
security-mode
none;
encryption none;
}
advanced-config {
data-retries
3;
packet-ttl 600;
remote-age-time 600;
endpoint-age-time 300;
allow-retransmit true;
arp-cache
false;
qam16-threshold -85;
qam64-threshold -70;
}
Security configuration
The default security mode, as shown above, is none.
The following configures the LN module to use pre-shared key authentication with the passphrase
'mypassphrase' and aes256-ccm encryption.
NOTE
When viewing the configuration, the passphrase that you entered is not displayed in plaintext.
This is a security measure.
% set interfaces interface LnRadio ln-config security encryption aes256-ccm security-mode
psk passphrase mypassphrase
% show interfaces interface LnRadio ln-config | details
radio-mode standard;
device-mode access-point;
network-name MyNetwork;
data-compression lzo;
header-compression true;
power
40;
tx-frequency 451.4;
rx-frequency 456.4;
channel 12.5KHz-9.6ksps;