Retrofit Kit Model
LB96-UNV-840-A-P (8ft)
LB48-UNV-840-A-P (4ft)
Light Bar Model/Qty
LB Interconnection Wires Needed
2x
LB-LE-40K-4FT-A (4ft)
2x
Interconnect wires
1x
LB-LE-40K-4FT-A (4ft)
Nominal Input Power
82W
41W
Driver
1x driver prog. at 2A output
(Wiring Diagram A)
1x driver prog. at 1A output
(Wiring Diagram B)
Retrofit Kit Accessories
LBACCP8
LBACCG
LBACCG8
Lens
LENS-RFITA-8
LENS-RFITA-4
Min Fixture Length
96”
(2438mm)
48”
(1219mm)
Min Fixture Mounting Flat width &
Min Fixture Driver Compartment Size
Min. flat width:
2-1/2” (64mm)
Minimum driver compartment size:
4” x 1-13/16”x 47”
(101 x 46 x 1194mm)
Min. flat width:
2-1/2” (64mm)
Minimum driver compartment size:
2-3/4” x 1-13/16” x 48”
(70 x 46 x 1219mm)
Mounting Brackets Qty and
Mounting
2x from light bar edges:
3” (76mm)
1x in center: 48” (1219mm)
2x from light bar edges:
3” (76mm)
Table 2: Required Driver Accessory Kit and Dimensions for Fixture Installation
The table below lists:
• Light Bar Retrofit Kit nominal input power.
• Light engine model/length required and number of light engine interconnection wires required (provided).
• Required driver needed vs. light bar retrofit kit type.
• Required lens assembly.
• Fixture dimensions (minimum flat mounting surface width and minimum driver compartment dimensions).
• Number of mounting brackets and installation notes.
Fixtures need to be within the below specifications and measured before installation.
Retrofit Kit can be installed in recessed or surface mounted fluorescent fixtures.
