2
Track
Lock
Lock
Mechanical fixing knob
A
ON
OFF
B
1
2
0
Mechanical
fixing knob
Circuit
selector knob
C
Luminaire Installation
Unpack unit from packaging. Properly inspect for
defects before installing.
RISK OF DAMAGE:
Make sure the luminaire is only
carried out by holding two ends of gear box. Do
not touch the light guide when removing the fixture
from the packaging or during the installation.
(A) On both adapters, rotate mechanical fixing knob clockwise to ON position to lock fixture to track.
(B) On adapter with metal pin on top, select the desired circuit with the circuit selector knob.
(C) For the dummy adapter without the metal pin, need to turn mechanical fixing knob clockwise to the
cavity stopper as shown above.
CAUTION:
Must turn mechanical fixing knobs to the right position to prevent the luminaire from falling off
without locking.
Ensure alignment lines on luminaire and
adaptors are parallel and insert fixture vertically
into track.
Track
Gearbox
Light guide
Dummy
adapter
Adapter with
metal pin
1
3
2
CAUTION
RISK OF DAMAGE
• Remove protective film on Light Guide after installation.
• Do not touch Light Guide to avoid dirt, oil and fingerprints.
ATTENTION
RISQUE DE DOMMAGES
• Retirez le film protecteur du luminaire après son installation.
• Ne touchez pas la surface émittrice du luminiaire pour éviter
les saletés, graisses ou empreintes digitales.
Cavity stopper
Dummy adapter
