6
49-2000492 Rev. 0
USING THE KITCHEN HUB
Connecting your WiFi Connect Enabled Appliance
Your GE Appliances Kitchen Hub is recommended to be
connected to WiFi.
Use the Setup Wizard to connect unit to WiFi.
Heat Sensor
This unit is equipped with a heat sensor that will
activate the ventilation FAN if excessive temperatures
are detected above the cooktop surface to protect the
Kitchen Hub components from overheating.
If FAN is OFF and excessive temperature is detected,
the FAN will automatically turn to LOW speed. You may
adjust FAN speed to MEDIUM, HIGH, or BOOST, but
you will not be able to turn to OFF until temperatures
return to an acceptable level.
Screen Moisture Protection System
Your Kitchen Hub is equipped with a screen protection
system. The system expels small amounts of air around
and below the screen to keep the touchscreen area
dry and clean by preventing condensation or other
substances during cooktop operation.
The system is on while the screen is in the awake
state and off when the screen is in screensaver mode
or off position. Operating the cooktop while screen
protection system is off may result in condensation
on the touchscreen. It is recommended to activate
screen during cooking to prevent this from happening. If
condensation build up continues while protection system
is active, turn the ventilation FAN on to provide additional
protection.
USING THE KITCHEN HUB:
WiFi / Heat Sensor / Screen Moisture Protection