Anti-Tip Device Installation Instructions
ALL RANGES CAN TIP
●
INJURY COULD RESULT
●
INSTALL ANTI-TIP
DEVICE PACKED WITH
RANGE
●
SEE INSTRUCTIONS
Fig. 1
r
Wood screws
;
/m
I
i
Bolt
I
Secure device
to floor with
two wood screws
See template for
location of holes.
,/ \\
/
\\
44
Tools Needed:
●
Phillips head screwdriver
The stability bracket attached to
●
Template (packed with range)
the range should be positioned over
the Anti-Tip device bolt and
Locate the
device on the
lowered onto it.
floor per the
instructions.
Secure the Anti-Tip device to the
floor with the two wood screws
provided. See Fig. 1.
Move the range directly in front of
the countertop cutout. Be certain
you have adjusted the range legs
to raise the maintop above the
countertop. Standing in front of the
range, tilt it toward you.
the range into the cutout. Keep the
back raised in order to clear the
Anti-Tip device on the floor.
Once the range is in position, open
the lower compartment door by
grasping the handle and pulling the
door down flat. Adjust the leveling
legs to properly seat the maintop
onto the countertop. Be certain the
range does not hang from the
countertop. Place the washer over
the stability mounting device and
securely tighten with the wing nut.
See Fig. 2.
Fig. 2
w
Wing nut
I
Summary of Contents for JSP62GN
