background image

TIMED BAKING

(continued)

How to Set Delay Start and Automatic Stop

Quick Reminder:

1. Press the COOK TIME pad.

2. Press the INCREASE/ DECREASE pad to set

cooking time.

3. Press the STOP TIME pad.

4. Press the INCREASE/ DECREASE pad until

desired Stop Time appears in display.

5. Press the BAKE pad.

6. Press the INCREASE/ DECREASE pad to

select the oven temperature.

T

avoid possible burns,  place the shelves in the

correct 

 before you turn the oven on.

You can set the oven control to turn the oven on
automatically, cook for a specific length of time and
turn off automatically.

For example:  Let’s say it’s 

 and dinner time is

shortly after 

 The recipe suggests 3 hours baking

time at 

 Here’s how:

1. Press the COOK TIME pad.

COOK

TIME

n

2. For 3 hours of cooking time, press the

A

INCREASE pad until 

 appears in

the display.

3. Press the STOP TIME pad.

STOP
TIME

 

in the 

 and

I

flashes. The control

. . . . . 

automatically sets Stop Time by adding the Cook
Time to the time of day. In this example, the time
of day is 

 and the Cook Time is 3 hours. Adding

 hours to the time of day equals 

4. Change the Stop Time from 

 to 

 by

pressing 

the INCREASE pad until 

 appears

in the display.

 

 

 the BAKE pad.

BAKE

6. Press the INCREASE pad. The last oven set

temperature appears in the display. Press the
INCREASE or DECREASE pad until “325°”

is displayed.

At 

 the oven will turn on automatically.

The word “ON” and the changing oven

temperature, starting at 100”F., will be displayed
as the oven heats up. The oven will continue to
cook for the programmed 3 hours and shut off

automatically at 

7. Remove the food from the oven. Remember, even

though the oven shuts off automatically, foods
continue cooking after the controls are off.

NOTE:

● 

The low temperature zone of this range (between

 and 

 is available to keep hot cooked

foods warm. Food kept in the oven longer than 2
hours at these low temperatures may spoil.

● 

When setting your oven for a delay start, never

let foods such as dairy products, fish, meat,
poultry, etc. sit for more than   hour before 

cooking begins. Room temperature promotes the

 of harmful bacteria. Be sure the oven light

 

is off because heat from the bulb will speed
bacteria growth.

18

Summary of Contents for JSP38GP





































Reviews: