9
8
Console setup Overview, cont.
After you’ve followed the steps on page 6 and 7 and connected power to the Console, the
display shows the time of day at the left of the bottom line, with HOME CONTROL in the
top line. See below:
All features (except Home Control) require access to the Menu mode. To do this, press
either of the Menu Start up/down buttons (under the lid to the bottom left of the display).
The display then shows ENTER PIN (Personal Identification Number) in the top line.
The default PIN is 0000, see page 24 for how you can change this, but for now press
0000 on the keypad (under the lid to the bottom left of the display). This clears the top line
and shows * for each number entered.
When you enter the PIN the display shows the First Level of the menu at step 1, below.
See next page.
Installation
Console keyboard buttons are as follows:
0-9 Used for all number entries.
On Used to send a X10/GE On message or to enter am in a time.
Off Used to send a X10/GE Off message or to enter pm in a time.
Menu up Used to initially enter the menu and then to move up through the items.
Menu down Used to initially enter the menu and then to move down through the
items.
Clear Used to clear entries, back up through the menu levels, and to bypass
problem Door/Window Sensors or Motion Detectors.
Enter Used to terminate an entry.
To the right of the display:
Arm Home Used to arm the console in the Home mode.
Arm Away Used to arm the console in the Away mode.
Installation
Console Setup Overview
HOME CONTROL
12:00 am
ENTER PIN
12:00 am
****
12:00 am
1. INSTALL
