21
20
Installation
Setting the phone numbers
Press either of the Menu up/down buttons (under the lid to the bottom left of the display).
The display then shows ENTER PIN (Personal Identification Number) in the top line.
The default PIN is 0000, so press 0000 on the keypad (under the lid to the bottom left of
the display), or enter your PIN if you changed it (see page 24). This clears the top line
and shows * for each number entered.
This takes you to the first level of the menu at step 1. This is the INSTALLATION level.
The display looks like this:
Press an up or down menu button until you reach the PHONE NUMS menu below, and
then press OK (or press 3, instead of up/down, to go into the PHONE NUMS menu):
Press an up or down Menu button to select the desired sub-menu:
PHONE 1, PHONE 2, PHONE 3, PHONE 4, PHONE 5, PHONE 6
Press OK at the desired number (1-6). The display shows SET PH1, SET PH2, etc. Enter
the phone number, up to 16 digits (off/pm gives a pause). Press OK. This takes you to the
next phone number to be stored.
Press Clear to back out of the menu. If you press Clear while entering numbers, before
you’ve finished setting the phone number, it clears the numbers. If you press Clear after
you finished entering the phone number and pressed OK, you are asked to confirm,
1. YES, 2 NO. Pressing 1 takes you back to the HOME CONTROL screen. Press 2 to stay
in the INSTALL menu.
Installation
Setting the Clock
Press either of the Menu up/down buttons (under the lid to the bottom left of the display).
The display then shows ENTER PIN (Personal Identification Number) in the top line.
The default PIN is 0000, so press 0000 on the keypad (under the lid to the bottom left of
the display), or enter your PIN if you changed it (see page 24). This clears the top line
and shows * for each number entered.
This takes you to the first level of the menu at step 1. This is the INSTALLATION level.
The display looks like this:
Press an up or down menu button until you reach the SET CLOCK menu, and then press
OK (or press 2, instead of an up or down menu button, to go directly to the screen below):
Enter the time by pressing the digits on the Console’s keyboard. Then press am or pm.
Then press OK.
Press Clear to back out of the menu. If you press Clear while entering numbers, before
you’re finished setting the clock, it clears the numbers. If you press Clear after you’ve set
the time and pressed OK, you are asked to confirm, 1. YES, 2 NO. Pressing 1 takes you
back to the HOME CONTROL screen. Press 2 to stay in the INSTALL menu.
ENTER PIN
12:00 am
****
12:00 am
1. INSTALL
2. SET CLOCK
4:00 pm
ENTER PIN
12:00 am
****
12:00 am
1. INSTALL
3. PHONE NUMS
