GE JP328BKBB, Owner'S Manual & Installation Instructions

Page: 9 / 48

49-80759
9
TOOLS YOU WILL NEED
MATERIALS YOU WILL NEED
Installation
Electric Cooktop
Instructions
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
•
IMPORTANT
³ Save these instructions
for local inspector’s use.
•
IMPORTANT
³ Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Product failure due to improper installation is
not covered under the Warranty.
•
WARNING
³ This appliance must be
properly grounded.
•
ATTENTION INSTALLER
³ ALL
COOKTOPS MUST BE HARD WIRED (DIRECT
WIRED) INTO AN APPROVED JUNCTION BOX. A
“PLUG AND RECEPTACLE” IS NOT PERMITTED
ON THESE PRODUCTS.
• Skill level - Installation of this appliance
requires a qualified installer or electrician.
• Proper installation is the responsibility
of the installer and product failure due to
improper installation is NOT covered under
warranty.
Saber Saw
Pencil
Safety Glasses
1/8" Drill Bit & Electric or
Hand Drill
Ruler or Straightedge
Phillips and Flat Head
Screwdriver
JP328
“If you have questions, call 800.GE.CARES or visit our website at: GEAppliances.com”
PARTS INCLUDED
4 Screws
(WB1X1137)
Wire Nuts
Junction Box
FOR TILE COUNTERTOP INSTALLATION
• Electric drill and 5/32” drill bit
• 4
3
/
16
” x 1
1
/
4
” masonry screws
This cooktop cannot be installed in countertops
that cannot accept screws, such as granite or
marble.
INST
ALL
ATION INSTRUCTIONS