AND CLEANING
(continued)
Oven
Replacement
(;
Before replacing
oven light bulb,
disconnect the electric power
for
your range the
main fuse or circuit breaker.
sure to let the light cover and bulb cool completely
before removing or replacing them. When in use,
become warm enough break if touched
with moist cloth or towel, When cleaning, avoid
warm light bulb with cleaning cloths if the
light
is
bulb is covered with
glass
which is held in place with wire.
Remove the
oven door,
if desired, to reach
cover easily.
To remove:
.
/
/
●
Hold your hand
under the cover
\ \
so
t fall
when released.
w
With fingers
the same hand.
firmly push back
the wire cover
holder. Lift off
Wire Cover Holder
the cover.
●
DO NOT REMOVE ANY SC:
●
Replace bulb with 40-watt home
bulb.
To replace:
●
PI
it into the groove of
1
receptacle. Pul I
the wire forward to the center of cover until it snaps
in place. When in place, the
holds the cover
firmly. Be certain the wire in the depression in the
the cover.
●
Connect electric power to the range.
Porcelain Enamel Cooktop
porcelain enamel finish is sturdy but breakable
misused. This finish is acid-resistant. However, any
sp i I led (such fruit juices, tomato
or
not be permitted remain on
the finish.
If’ tic ids spill on the cooktop while it is
use
towel
to wipe it up right away. When the
has
wash with
water or
cleansing powders. Rinse well.
For
spills such fat smatterings. wash with soap
and water or
powders after
has
cooled, R
t. Polish with dry
Heating Elements
. . .
the
bake
element or the broil element.
soit
burn
when the
heated.
,
The bake clement can be lifted gently to clean the
oven floor, If
residue or ash accumulate
around the bake element
wipe around the
element with warm water-.
28
