GE JKS10, Technical Service Manual

Page: 20 / 66

– 20 –
18
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Press the
Bake
and
Broil Hi/Lo
pads
(on double oven models, use the
upper
oven controls) at the same time for
3 seconds, until the display shows
SF.
Press the
Clock
pad once. The
display will show
12 hr.
If this is
the choice you want, press the
Start pad.
Press the
Clock
pad again to change
to the 24-hour military time clock.
The display will show
24 hr. If this
is the choice you want, press the
Start
pad.
Press the
Clock
pad again to black
out the clock display. The display
will show
OFF. If this is the choice
you want, press the
Start
pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
Tone Volume
(on some models)
This feature allows you to adjust the tone
volumes to a more acceptable volume. There are
three possible volume levels.
Press the
Bake
and
Broil Hi/Lo
pads
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds, until the display
shows
SF
.
Press the
Oven Light On/Off
pad. The
display will show 2 BEEP . This is the
middle volume level.
Press the
Oven Light On/Off
pad again.
The display will show
3 BEEP
. This is
the loudest volume level.
Press the Oven Light On/Off pad again.
The display will show
1 BEEP
. This is
the quietest volume level.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Choose the desired sound level
(
1 BEEP , 2 BEEP , 3 BEEP ).
Press the
Start
pad to activate the
desired level shown.
NOTE:
■
On double oven models, this activates this
special feature for both ovens.
■
On models with oven knob(s), this feature is
not available for the lower oven.
Cook and Hold
Your new control has a cook and hold feature that
keeps cooked foods warm for up to 3 hours after
Timed Baking or Roasting is finished.
NOTE: This feature can only be programmed to
work with Timed Baking or Roasting. (See the
Using the timed baking and roasting features
section.) After Timed Baking or Roasting has
automatically stopped, the programmed Cook
and Hold will automatically start.
To activate this feature for use after
Timed Baking or Roasting, follow the
steps below.
Press the
Bake
and
Broil Hi/Lo
pads
(on double oven models, use the
upper oven controls) at the same
time for 3 seconds until the display
shows
SF.
Then proceed with steps
2 through 3, using the pads for the
upper or lower oven.
Press the
Cooking Time
pad. The
display will show
Hld OFF.
Press the Cooking Time pad again to
activate the feature. The display will
show
Hld ON.
Press the
Start
pad to activate the
cook and hold feature and leave the
control set in this special features
mode.
NOTE: On models with oven knob(s), this feature
is not available for the lower oven.
+
+
+