GE JKP18 Series, Technical Service Manual

Page: 32 / 70

– 30 –
Microwave Removal
The microwave is fastened to the top of the lower
oven by 2 screws in the front and metal tabs in the
rear which insert into slots in the unit’s frame. The
microwave can be easily removed from the lower
oven without removing the unit from the wall.
To remove the microwave:
1. Open the lower oven door and remove 3
screws from the bottom of the trim.
2. Open the microwave door and remove 2 T-15
torx screws and the trim.
3. Disconnect the wiring connectors under the
microwave.
4. Remove 2 screws from the front of the 2
mounting tracks.
5. Slide the microwave out of the unit.
Microwave Outer Case Removal
To remove the outer case:
1. Remove the microwave from the oven.
2. Remove 1 screw and the exhaust vent cover.
3. Remove 8 screws and the air tunnel.
4. Remove 1 screw from each trim mounting
bracket.
5. Remove the screws from the right side panel.
Lift up to release the upper tabs from the
chassis and remove the panel.
6. Remove 2 screws from the left side of the
case and 2 screws from the back of the case.
7. Slide the case back to separate the case tabs
from the chassis and remove.
Microwave Door
The door is serviced by replacing the outer door
parts or by replacing the complete door.
To remove the door:
1. Remove 2 bolts holding the upper and lower
door hinge to the oven.
2. Carefully open the door and, while moving the
door toward you, work the upper hinge out
through the opening in the oven.
Exhaust Vent Cover
Air Tunnel
Trim Mounting
Brackets
Right
Side Panel
Case
Remove
Do Not Remove
Wiring Connectors
Screw
Screws
Screws