– 72 –
1. Remove the four T20 Torx screws from middle cover trim.
2. Remove the four T20 Torx screws from middle trim.
3. Remove the two 1/4 in. screws from lock motor assembly and set assembly aside.
4. Press down on the black plastic tab on top of the frame and slide the board assembly out. There is
enough wire lead length to turn boards over to do checks.
Accessing Machine Control Board/Bridge Board
Summary of Contents for JK3800DH1BB
Page 58: ...58 Schematic Diagram...
Page 73: ...73 Machine Control Schematic...
