manualshive.com logo in svg

GE JK3800DH1BB, Technical Service Manual

Share
Download
GE JK3800DH1BB Technical Service Manual Download Page 65

– 65 –

Cooling Fan Motor Reinstallation

1.  Reinstall the four screws to secure the blower 

motor assembly to the frame.

2.  Reinstall the eight screws securing the top cover 

DQGWKH¿YHUHPDLQLQJVFUHZVRQWKHULJKWVLGH

fan motor cover.

3.  Reinstall the ten screws on the back panel.

FAD Board

The FAD board replaces the older version of the 

monitoring cooling fan operation, which was 
thermally operated. The FAD board is a small sensor 
that provides speed feedback to the ERC. There are 
no resistance checks available for this board, only 
DC voltage checks.

•  Check for DC supply voltage at the upper FAD 

board.

• 5 

VDC 

black to white.

• Blue to white is signal to control.

FAD Board Removal

Unplug the connector and remove one T10 Torx 

screw that secures the board to the motor assembly.

L2 High Limit Switch

A safety thermostat is used in the event of a thermal 

runaway (example: welded relay contacts).  It will 
open the L2 circuit to all the elements. 

Summary of Contents for JK3800DH1BB













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands