Questions?
Use This Problem Solver
PROBLEM
POSSIBLE CAUSE AND REMEDY
CONTROL PANEL
. START pad not touched.
ON, YET OVEN WILL
. Door not securely closed.
NOT OPERATE
. Another function was touched. Touch CLEAR/OFF to cancel.
●
Numbers not entered after selecting Time cook function.
. Finished temperature not entered after entering Auto Roast Code 7.
. CLEAR/OFF pad touched accidentally.
. No code number entered after touching Auto Roast.
FOODS OVERCOOKED
●
Not enough time set when using Time cook function because starting temperatures of
OR UNDERCOOKED
foods varied widely.
. Varying density and amount of foods will sometimes require more cooking time.
. Probe not inserted properly into meat or dish. Check cookbook or Auto Roast section
of this book.
. Incorrect power level entered.
. Dish not rotated, turned or stirred as called for in recipe.
. Too many dishes in oven at same time.
●
Food not thoroughly defrosted.
Improper use of coverings. Check cookbook and this book for instructions.
“PROBE” APPEARS
●
Probe not inserted properly into oven receptacle or food.
ON DISPLAY
. Probe not used, although Auto Roast pad has been touched.
“ERROR” APPEARS
●
When using Auto Roast Code 7 to Temp Cook/Hold, you have entered a temperature
ON DISPLAY
of less than
or more than 199*F.
All these things are normal on your microwave oven:
●
Steam or vapor escaping from
●
Dull, thumping sound while
●
Some TV-Radio interference
around the door.
oven is operating.
might be noticed while using your
●
Light reflection around door or
g oven light and change
microwave oven. It’s similar to the
outer case.
in blower sound may occur while
interference caused by other small
operating at power levels other
appliances and does not indicate a
than high.
problem with your oven.
39
Summary of Contents for JHP64G
Page 42: ... 42 ...
