GE JGRS06BEJ, Owner'S Manual

Page: 8 / 36

8
Operating Instructions
Safety Instructions
Consumer Support
Tr
oubleshooting T
ips
Not all features are on all models.
To Set the Timer
The timer does not control oven operations.
The maximum setting on the timer is 9 hours
and 59 minutes.
Touch the
TIMER/CLOCK
pad.
Touch the + or – pad until the
amount of time you want shows in
the display. The maximum time that
can be entered in minutes is 59.
Times more than 59 minutes should
be changed to hours and minutes.
If you make a mistake, touch the TIMER/CLOCK
pad and begin again.
Touch the
START
pad. The time
will start counting down, although
the display does not change until
one minute has passed.
When the timer reaches
:00,
the
control will beep 3 times followed by
one beep every 6 seconds until the
TIMER/CLOCK
pad is touched.
The timer is a minute timer only.
The CLEAR/OFF pad does not affect
the timer.
Using the clock and timer.
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of
day cannot be changed during a delayed
cooking or a delayed self-cleaning cycle.
Touch the
TIMER/CLOCK
pad twice.
Touch the
+
or
–
pad.
If the
+
or
–
pad is not touched
within one minute after you touch the
TIMER/CLOCK
pad, the display reverts to
the original setting. If this happens, touch
the
TIMER/CLOCK
pad twice and reenter
the time of day.
Touch the
START
pad until the time
of day shows in the display. This
enters the time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
CLOCK pad. The time of day shows until another
pad is touched.
Make sure the clock is set to the
correct time of day.
To Turn Off the Clock Display
If you have several clocks in your kitchen,
you may wish to turn off the time of day
clock display on your oven.
Touch the
TIMER/CLOCK
pad once
to turn off the time of day display.
Although you will not be able to see
it, the clock maintains the correct
time of day.
Touch the
TIMER/CLOCK
pad twice to
recall the clock display.
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the
TIMER/CLOCK
pad, then touching the
+
or
–
pad until the time you want
appears in the display.
If the remaining time is not in the display
(clock, start time or cooking time are in
the display), recall the remaining time by
touching the
TIMER/CLOCK
pad and then
touching the
+
or
–
pad to enter the new
time you want.
To Cancel the Timer
Touch the
TIMER/CLOCK
pad twice.