19
Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
www.GEAppliances.ca
Clean with an abrasive cleanser or steel
wool. After cleaning, rinse the racks with
clean water and dry with a clean cloth.
To make the racks slide more easily,
apply a small amount of vegetable oil
to a paper towel and wipe the edges
of the oven racks with the paper towel.
Do not spray with Pam
®
or other
lubricant sprays.
Oven Racks
Painted surfaces include the sides,
top of the control panel and the drawer
front. Clean these with soap and water
or a vinegar and water solution.
Do not use commercial oven cleaners,
cleaning powders, steel wool or harsh
abrasives on any painted surface.
Painted Surfaces
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface, use
warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface
in the direction of the grain. Follow the
cleaner instructions for cleaning the
stainless steel surface.
To inquire about purchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer or Camco
Parts Store nearest you, please call our
toll-free number:
National Parts Center
1.800.661.1616
www.GEAppliances.ca
Stainless Steel Surfaces
(on some models)
Oven rack
The door is very heavy. Be careful when
removing and lifting the door.
Do not lift the door by the handle.
To remove the door:
Fully open the door.
Push the hinge locks down toward
the door frame, to the unlocked
position. This may require a
flat-blade screwdriver.
Close door to the door removal
position.
Firmly grasp both sides of the door
at the top.
Lift door up until the hinge arm is
clear of the slot.
To replace the door:
Firmly grasp
both sides of
the door at
the top, with
the door at the
same angle as the
removal position.
Seat the indentation
on the bottom of the hinge arm into
the bottom edge of the hinge slot.
Fully open the door.
Push the hinge locks up against the
front frame of the oven cavity to the
locked position.
Close the oven door.
Seated
Hinge Arm
Indentation
Bottom
edge
of slot
Hinge arm
Slot
Hinge arm
Locked
Position
Removal position
Lift-Off Oven Door
Hinge lock
(unlocked
position)
Summary of Contents for JCBS55
Page 34: ...34 ...