GE JBP80, Use And Care & Installation Manual

Page: 52 / 56

QUESTIONS?
USE THIS PROBLEM SOLVER
PROBLEM
“F-AND A NUMBER”
FLASH
THE DISPLAY
“OFF” APPEARS
THE DISPLAY
CLOCK AND
WORK
OVEN
WORK
OVEN LIGHT
DOES
WORK
SURFACE LIGHT
DOES NOT WORK
FOOD
BROIL PROPERLY
FOOD DOES
ROAST BAKE
PROPERLY
OVEN TEMPERATURE
TOO HOT
TOO COLD
OVEN WILL NOT
SELF-CLEAN
POSSIBLE CAUSE
●
time display flashes “F-and a number”, you have function error
Press the
CLEAR/OFF pad. the oven to cool for one hour. If the failure
code repeats, disconnect all power to the range. Call fur service.
too hot for
the self-clean cycle to be set.
or
cycles attempted too soon self-cleaning.
Let the cool longer.
●
Make sure the
electrical plug is into a live, properly grounded
outlet.
for power outage.
●
See the and Timer section of this guide.
●
The plug on the is inserted in the electrical outlet.
* The circuit breaker in your house has been tripped, or a fuse has been blown.
●
The oven controls are not properly set.
●
door left the locked position after cleaning.
●
The bulb is or defective. Tighten or replace.
. The switch operating the oven light is broken. Call for service.
The fluorescent is loose or defective. Adjust
●
Press switch for 2 seconds. the light does not come on, repeat.
●
The switch operating the light is broken. service.
●
The oven is not set at BROIL.
●
The door was not left open to the broil stop position as recommended.
●
Improper shelf position being used. See the Broiling Guide.
●
Food is being cooked on hot pan.
Cookware is not suited for broiling.
●
Aluminum foil used on the broil pan rack has not been fitted properly
and slit as recommended.
●
The oven is not set at BAKE.
●
Shelf position is incorrect. See the Roasting or Baking sections.
●
The oven shelf is not level.
●
Incorrect cookware or cookware of improper size is being used.
●
The oven thermostat needs adjustment. See the Adjust the Oven
Yourself section.
●
The oven thermostat needs adjustment. See the Adjust the Oven
●
The oven temperature is too high to set self-clean operation. Allow the range to
cool to room temperature and reset the controls.
●
The door latch handle not moved all the way to the right.
●
Probe is plugged the oven. Remove the probe.
52