Clock
The clock must be set for the
automatic oven timing functions
to work properly. The time of day
cannot be changed during a Timed
Baking or a Self-Cleaning cycle.
To Set the Clock
1. Press the
CLOCK
CLOCK pad.
2.
+
3. Press the CL
Press the
INCREASE or
DECREASE pad to
set the time of day.
OCK pad to start.
Timer
The timer is a minute timer only.
The timer does not control
oven operations. The maximum
setting on the timer is 9 hours and
55 minutes.
To Set the Timer
1.
TIMER
ON/OFF
Press the TIMER
The timer will start automatically
ON/OFF pad.
within a few seconds of releasing
the pad.
The timer, as you are setting it,
Press the
will display seconds until 1 minute
INCREASE or
is reached.
DECREASE pad to
Then it will display minutes
set the amount of
and seconds until 10 minutes
time on timer.
is reached.
After 10 minutes, it will display
hours (“HR” now appears in
display) and minutes until the
maximum time of 9 hours and
55 minutes is reached.
To Reset the Timer
To Cancel the Timer
If “TIMER” is displayed, press the INCREASE or
Press the TIMER ON/OFF pad until the word
DECREASE pad until the desired time is reached.
“TIMER” disappears from the display.
If “TIMER” is not displayed, press the TIMER
pad first, then follow the instructions above to set
the timer.
Power Outage
After a power outage, when power
is restored, the display will flash
and time shown will no longer be
correct-for example, after a
minute power interruption the
clock will be 5 minutes slow.
All other functions that were in
operation when the power went out
will have to be programmed again.
End of Cycle Tone
The end of cycle tone is a series
of 3 beeps followed by 1 beep
every 6 seconds. If you would like
to remove the signal that beeps
every 6 seconds, press and hold the
pad for 10 seconds.
To return the signal that beeps
every 6 seconds, press and hold the
CLEAR/OFF pad for 10 seconds.
Display Messages
If “door” appears in the display,
the door latch handle is not moved
all the way to the right. Move the
latch handle and cleaning will
start. If “LOCK” appears in the
display, the oven door is in the
locked position. BAKE, BROIL
and COOK TIME cannot be set if
the door is in the locked position.
15
