manualshive.com logo in svg

GE JBP79, Use And Care & Installation Manual

Share
Download
GE JBP79 Use And Care & Installation Manual Download Page 20

TIMED BAKING

(continued)

How to Set Delay Start and Automatic Stop

Quick Reminder

1. Press the BAKE pad.

2. Press the INCREASE or DECREASE pad to

select the oven temperature.

3. Press the COOK TIME pad.

4. Press the INCREASE or DECREASE pad to

set the length of Cooking Time.

5. Press the STOP TIME pad.

6. Press the INCREASE or DECREASE pad

until the desired Stop Time appears in the display.

To avoid possible burns, place the shelves in the
correct position before you program the oven.

You can set the oven control to turn the oven on
automatically, cook for a specific length of time
and turn off automatically.

n

1. Press the BAKE pad.

BAKE

2. Press the INCREASE or DECREASE

+

pad until “325°” is displayed.

3. Press the COOK TIME pad.

COOK

TIME

4. Press the INCREASE pad until

 appears in the display.

+

A Cook Time of 3 hours now appears
in the display.

5. Press the STOP TIME pad. The

STOP

display prompts you to set the Stop

TIME

Time you want. It also shows the
earliest Stop Time you can set.
In this example,

 and “STOP

TIME” appear in the display.

The control automatically sets the Stop Time by
adding the Cook Time to the time of day. In this
example, the time of day is 

 and the Cook

Time is 3 hours. Adding 3 hours to the time of day
equals 

6. Change Stop Time from 

 to 

by pressing the INCREASE pad until

+

 and Stop Time appear in the

 The words “DELAY TIMED

BAKE” appear in the display.

At 

 the oven will turn on automatically. The

word “ON” and “100°” will be displayed. The Cook

Time will begin to count down. As the oven heats
up, the display will show the changing temperature.
The oven will cook for the programmed three hours
and shut off automatically at 

7. At the end of Timed Baking, the display will show

“OHR:OO COOK TIME” and the oven will turn off.
The end of cycle tone will sound.

8. Press the 

 pad to clear the

CLEAR

display if necessary. Remove the food

OFF

from the oven. Remember, even
though the oven shuts off automatically,
foods continue cooking after the
controls are off.

NOTE: Foods that spoil easily such as milk, eggs,
fish, stuffings, poultry and pork should not be allowed
to sit for more than one hour before or after cooking.
Room temperature promotes the growth of harmful
bacteria. Be sure that the oven light is off because heat
from the bulb will speed harmful bacteria growth.

20

Summary of Contents for JBP79









































Reviews:

No comments

Brands by name

Popular brands

Load more brands