background image

Explained

Feature Index  Not all models have all features.

on page

 Storage Drawer  (on some models)

3,29

2 Anti-Tip Device See  the Installation Instructions.

3,25, 30,32

3 Broil Element

4,20,29

I

4 Oven Door Latch  Use for self-cleaning only.

 14,16,18,20,22-25

5 Surface Unit “ON” Indicator Lights

I

8,9

6 Surface Light  (on some models)

I

9,27

7 Surface Unit Control Knobs

8,9,27

8 Oven Light Switch  (on some models)

13

9 Oven Control, Clock and Timer

11, 12,27

10 Surface Light Switch

9

11  Broiler Pan and Grid  (on some models)

4, 18,

Do not clean in the self-cleaning oven.

20-22,29

12 Oven Vent  Located under 

 rear surface unit.

27

13  Surface Units. 

 Pans

 4,5,8-10,26

14 

 / Lift-Up 

 (on some models)

I

26,29

15  Model and Serial Number Location

2

Located behind the range door or behind the storage drawer.

16  Oven Interior Light

13,28

Comes on automatically when door is opened.

17 Oven Shelf Supports

13, 14, 18,

Shelf positions for cooking are suggested in

21,23,29

the Baking, Roasting and Broiling sections.

18 Oven Shelf with Stop-Locks (number may vary)

4, 13-15,

I

22,29

19 Bake Element May be lifted gently for wiping oven floor.

4,29

20 “Big View” Window

16,27,28

 Lift-Off Oven Door with Broil Stop Position

20,22,28

Easily removed for cleaning.

22  Oven Door Gasket

4,22,28

23 Anti-Tip Label

7

Summary of Contents for JBP55





































Reviews: