background image

7

Featur

es of Y

our Range

Explained

Feature Index

Not all models have all features.

on page

Storage Drawer (on some models)

3, 29

Anti-Tip Device

3, 26, 30

See the Installation Instructions.

Anti-Tip Label

Bake Element May be lifted gently 

3, 4, 22,

for wiping the oven floor.

29

Broil Element

3, 4, 20,

22, 29

Oven Door Latch

13, 15, 18, 

Use for self-cleaning only.

20, 22–25

Surface Units, Drip Pans

3–5, 8–10,

26

Surface Unit Control Knobs

8, 27

Oven Light Switch

13

(for models with oven window)

10 Automatic Oven Light 

13

(on some models)

11 Clock and Timer (on some models)

10, 11

12 Oven On Light

10, 12, 

Latch Door Light

15–17

Preheated Light

13 Oven Temperature Knob

10, 11, 17,

18, 20, 

22–25, 27

Explained

Feature Index

Not all models have all features.

on page

14 Surface Unit “On” Indicator Light

8

15 Cooktop/Lift-Up Cooktop

3, 5, 8–10,

(on some models)

27, 29

16 Oven Vent

4, 27

Located under right rear surface unit.

17 Oven Interior Light

12, 22, 28

(on some models) Comes on 
automatically when door is opened.

18 Oven Shelf Supports

12, 18, 21

Shelf positions for cooking are 
suggested in the Baking, Roasting 
and Broiling sections.

19 Oven Shelf with Stop-Locks

12–15, 

(number may vary)

18, 23, 29

20 Model and Serial Number Location

2

Behind the storage drawer.

21 Lift-Off Oven Door with 

4, 20, 

Broil Stop Position

22, 28

Easily removed for cleaning.

22 Oven Door Gasket

4, 22, 28

23 Broiler Pan and Grid

4, 18, 

(on some models)

20–22, 29

8

8

12

13

14

8

8

JBP19

8

8

14

13

12

11

10

8

8

JBP21

Summary of Contents for JBP21









































Reviews: