GE JB400DP1BB, User Manual

Page: 41 / 57

41
Copyright 2009
Steam Clean Procedure –
IMPORTANT NOTES
•
If a steam clean cycle is initiated without water, press the
Clear/Off
pad to end the cycle.
Wait for the range to cool to room temperature before pouring water into the recessed area
and initiating another steam cycle.
• Do not open the door during the Steam Clean cycle. An error beep will sound upon
opening the door.
• If a steam cycle is interrupted by opening the door, oven needs to be allowed to
cool to room temperature and another steam cycle initiated.
• Press
Clear/Off
pad at any time to end the cycle.
• If mineral deposits remain in the oven bottom after cleaning, use a cloth or sponge
soaked in vinegar to remove them.
• Some water may drip from the bottom of the oven door. If this happens, wipe it up
at the end of the cycle.
• The door gasket may be wet when the Steam Clean cycle finishes. This is normal.
do not clean the gasket.
• If soil still remains after cleaning the oven, see the “
Care and Cleaning of the Range”
section of the Owner’s Manual for additional options.