GE Interlogix KTD-125, User Manual

Page: 31 / 37

KTD-125/127 PTZ Receivers User Manual Programming
1040823A / June 2003 31
Note:
When reentering programming mode, you must reprogram all mode-of-operation
choices, even if you are only changing one.
Table 3. Setting DIP switches for the desired mode of operation
DIP
Switch
Function Setting
OFF = Zoom in positive, zoom out negative 1 Zoom Polarity
ON = Zoom in negative, zoom out positive
OFF = Iris open positive, iris close negative 2 Iris Polarity
ON = Iris open negative, iris close positive
OFF = Not DC motors 3 Pan/Tilt Drive
ON = DC motors
4 OFF + 5 OFF = Normal
4 OFF + 5 ON = Random pan
4 ON + 5 OFF = 50% duty cycle
4 and 5 Autopan
4 ON + 5 ON = Disable autopan
OFF = Yes 6 Autopan on
Power-Up
ON = No
OFF = 12 VDC 7 Zoom Lens
Voltage
ON = 6 VDC
OFF = Not inverted 8 Invert Up and
Down Tilt
ON = Inverted
4)
Supply power to the receiver.
5)
Wait 5 seconds.
6)
Set DIP switch 10 to the off position to place the receiver in normal
mode.
To change mode-of-operation choices, repeat steps 1 through 6.