Installing the KTD-127
KTD-125/127 PTZ Receivers User Manual
4.2 M
AKING
C
ABLE
C
ONNECTIONS
See Figure 21 for the following procedures.
Removable terminal strip
Receiver card
Camera power/zoom lens
Pan/tilt
24 VAC power
RS422 control out
RS422 control out
Figure 21. KTD-127 cable connections
To prepare the cables for connection perform the following.
1)
Route the cables into the housing.
2)
Remove 6 inches of the outer casing from the camera/lens, pan/tilt,
and 24 VAC power cables.
3)
Remove the outer casing from the end of the RS422 cable(s).
To make the cable connections perform the following.
1)
Remove the terminal strip from the main relay board.
2)
Make connections as shown in Figure 22 through Figure 24.
20
1040823A / June 2003
Summary of Contents for Interlogix KTD-125
Page 1: ...KTD 125 125 24 KTD 125P 125P 24 KTD 127 127W PTZ Receivers ...
Page 37: ......
