49-60704-2
31
INST
ALLA
TION INSTRUCTIONS
Installation Instructions
5
INSTALL THE ICEMAKER FILL CUP
Ŷ ,QVWDOOWKH
icemaker fill cup
VLGHPRXQWHG
into the icemaker as shown.
7
MOUNT THE ICEMAKER
Ŷ /LIWWKHLFHPDNHUVRWKHILOOWXEHVKLSSHGZLWKWKH
UHIULJHUDWRUILWVLQWKHILOOFXSRDQJWKH
LFHPDNHURQWKHWZRPRXQWLQJVFUHZVLQWKH
side wall.
Make sure:
Ŷ
The power cord is still firmly in the socket.
Ŷ
The fill tube extends into the fill cup opening on
WKHEDFNRIWKHLFHPDNHU&KHFNWKHUHDURIWKH
refrigerator to make sure the fill tube has not
been pushed out of the back of the refrigerator).
Ŷ
The icemaker mounting screws are located in
the uppermost position of the mounting slots.
Ŷ
The icemaker is level.
Ŷ
The icemaker power switch is set to OFF.
THEN SECURELY TIGHTEN THE ICEMAKER
MOUNTING SCREWS.
6
PLUG IN THE ICEMAKER
Ŷ
Holding the icemaker in place, insert the
icemaker
power cord plug
into the socket on the rear wall,
making sure the prongs and holes are matched.
Press the plug firmly into the socket. Lock the plug
in place by clipping the restraints onto each side of
the plug. Make sure the restraints click into place.
Make sure the power cord is still in the hook on
the back of the icemaker.
13
10
KEEP THIS MANUAL
Ŷ
The warranty for the icemaker is printed in
this manual. Keep this manual with your
Refrigerator Owner’s Manual.
Ŷ
The icemaker installation inside the freezer is now
complete. Continue to the Water Valve Assembly
section.
9
ATTACH WARRANTY LABEL
Ŷ
A
label
LVSURYLGHGZLWKWKLVNLWWRUHFRUGWKH
date of installation for warranty purposes. Apply it
to the back of the refrigerator.
INSTALL THE MOUNTING SCREWS
Ŷ
Skip to Step 5 if screws are already in place in
the freezer side wall.
Ŷ
,QVWDOOWZRVHOIWDSSLQJ
Phillips
head screws
IURPWKHNLW
in the holes in the side wall.
The screw heads should extend
DERXWPPIURPWKH
side wall.
4
Hook
E
16
RE-INSTALL THE SHELF SUPPORT,
BUCKET, SHELF AND BASKET
Ŷ
Replace the center vertical shelf support, ice
bucket, chiller shelf and storage basket by
reversing the steps in Step 1.
8
