4.7
Connectors
4.7.1
Power Connector Pin-out for IC755CxW07CDx
and IC755CxSxxCDx
To connect the power supply,
refer to the section,
Connector: Terminal Euro (Tyco Electronics 284539-3)
Mating Connector: (Tyco Electronics 284510-3)
Pin #
Signal Name
Pin-out
1
+24 V dc
†
1
3
2
GND
3
FG
†
IC755CxSxxCDx supports both +12 V dc or +24 V dc IN
4.7.2
Ethernet for IC755CxW07CDx and
IC755CxSxxCDx
Refer to the section,
The QuickPanel
+
is equipped with 10BaseT/100-BaseTX Ethernet port(s). You can
connect an Ethernet network cable (unshielded, twisted pair, UTP CAT 5) to the unit
through the RJ-45 connector(s) on the bottom of the enclosure. LED indicators on the port
indicate channel status. The port can be accessed by Windows Embedded Compact 7
network communications or by your application.
4.7.2.1
Ethernet Port Details
Interface: Ethernet 10BASE-T/100BASE-TX
Pin #
Signal Name
Pin-out
1
TX+
8
1
Yellow
Green
2
TX-
3
RX+
4
NC
5
NC
6
RX-
7
NC
8
NC
Installation
GFK-2847F User Manual 39
For public disclosure
Summary of Contents for IC755CxW07CD SERIES
